Drilling & Production / OTC Report
104-page downhole oil tools catalog
More than 70 downhole oil tools in
five application categories highlight
this free 104-page catalog.
Mechanical set packers, hydraulic set packers, permanent packers,
service tools, and accessories are illustrated, described, and specified.
Twenty five mechanical set packers are showcsed to include ASI-X
and VSI-X models along with snapset,
thermal designs, and retrievable seal
Four hydraulic set packers are
specified to include DLH, hydroset,
plus permanent hydraulic isolation
designs. Among permanent packers
are Permapak single or dual bore and hydraulic Permapak plus accessories.
In the 27 downhole service tools presented are retrievable packers
and bridge plugs as well as spring loaded retrieving tool.
Eleven downhole tool accessories are also showcased to include on/
off tool, profile nipple, bit release joint, safety joint, and downhole tub-ing/casing swivel.
D&L Oil Tools: Tulsa OK
For FREE Literature, select #250 at ogpe.hotims.com
Class I, Div. 2 hazardous-applicable
PoE+ switch designed for upstream
EDS-P510A-8PoE PoE+ Ethernet Switches are UL
certified or use where atmospheres may contain the
presence of explosive elements.
Models are for deployment in Class I, Div. 2 hazardous locations for upstream oil applications as
well as gas storage and chemical processing.
These managed PoE+ designs can be safely installed in flammable environments for more flexible
oil and gas network deployment.
Unlike commercial-grade PoE+ types, the new
switches do not require an enclosure or remote
installation. This lowers overall system costs without compromising safety, maintenance demands, or
Safeguarded by 3KV surge protection, these instruments function
across -40° to +75°C. on selected models as they deliver network speeds
of up to 1000 Mbps to eliminate bottlenecks.
MOXA: Brea CA
For FREE Information, select #8 at ogpe.hotims.com
Drilling & Production — OTC Special Report
Reaction transducers measure static,
dynamic torque for endurance testing
Series 2270V & 2280V reaction style torque
transducers accurately measure static and dynamic torque with output signal provided in
both analog and digital.
The sensors serve a broad range of oilfield applications which include motors, servo motors,
gearboxes, actuators, or torque tools calibration.
Models measure static torque when installed
as a reaction transducer, or may be used for in-line rotating torque measurement where angular motion is limited to less
than a full rotation. Installation is through attachment to the mounting
flanges. Both series are characterized by high torsional stiffness and low
S. Himmelstein and Company: Hoffman Estates IL
For FREE Information, select #6 at ogpe.hotims.com
Series is multi-stage
fracing process alternative
Davies Descender Fracking Series is offered as
“an economical alternative for multi-stage fractur-
The frac balls are designed to withstand high
pressure and temperature in the process — but
then dissolve when no longer needed. Descender is
cited to provide “an engineered, eco-friendly, faster,
and lower cost solution.”
The frac balls comprise Davies DDP100 amor-
phous high temperature, high strength, water sol-
uble, biodegradable, heat stable injection molding
resin. Among specs are 1.30 specific g/cm3 gravity
per ISO 1183. Complete Descender data are free.
Davies Molding LLC: Carol Stream IL
Rotary steerable system developed
SureSteer 475-rss Rotary Steerable
System is newly developed to handle a
wide range of drilling parameters and up
to 200 rpm rotary speeds.
The new design complements the existing 675-rsm version. Its RSM
(rotary steerable motor) incorporates an integrated power section while
RSS (rotary steerable system) is designed to be run either below a drilling
motor or be driven directly from the top drive as required.
All tools feature proven “Push-the-Bit” steering technology. The manu-
facturer explains “the RSM is designed to maximize horsepower at the
bit, and the RSS to maximize build rate capability and drillstring speed
... to provide capability to match the major service companies’ advanced
The directional-drilling-applicable systems function with straightfor-
ward directional control procedures commonly used with steerable mo-
tors. They can be programmed to use an automated closed-loop feed-
back system for vertical or tangent angle control, or to operate with
downlinked instructions to efficiently drill any directional well plan.
APS Technology Incorporated: Wallingford CT
For FREE Information, select #9 at ogpe.hotims.com
Hinged centralizer for offshore wells
Centek S2 hinged centralizers are newly
developed for offshore wells when top of
hole centralization with oversized casing connectors is required.
In applications where quick casing connectors are used, slip-on bow centralizers cannot
be fitted because the unions stand proud of
the casing and a hinged centralizer is necessary.
Each half of Centek S2 is made from a single piece of hardened, high-grade steel. This
delivers up to 3.5-tonnes joint strength.
The new centralizers have “the strongest hinge of any latch-on centralizer with specially designed spiral pins that reduce installation time and
can be fitted to casing on the drilling platform or at the pipe yard.”
Centek Group: Devon UK & Oklahoma City OK